Water Jet Air Cooling System

1.Automatic Abrasive Feeding System

 

This auto-abrasive feeding system is a recommended product of our company. With the functions of shoring and feeding sands for the machine, it also improves the automation and lessens intensity of labor. 

Features :
1).Using air pressure to transport abrasive
2).Air pressure: 0.2MPA
3).Flow:<0.3M³/min
4).Sand storage bucket volume:200kg(each time)
5).Max feeding amount of abrasive:0-1000K/MIN
Automatic & High accuracy greatly reduce the workload of the workers.

2.Cooling System
1).Waterjet Auto Water Cooling Tower

We guarantee the hydraulic system can be used in a cicrcular manner and save water.

Details:
3.Air Cooling System

This air cooling system increases the cooling area and ventilation flow, which is almost unaffected by the working environment. It also has an independent automatic temperature control system and an independent cooling circuit. When the temperature reaches the set value, the air-cooler will work. It is clean, energy saving and environmental protection.

Details:
4.Oil Chiller

This chiller can take the place of water cooling tower, and much more efficient, if the temperature is high, this one is your best choice.

Voltage:380V 50Hz 3 Phase(or Customizable)                                Total unit capacity: 6.0KW
Refrigerating capacity:12000 Kcal/h                                                 Oil flow:50L/min
Oil Capacity:100L                                                                             Chilled water pipe diameter: G1"×1"
Dimension: 750×800×1600mm                                                         Weight: 210KG

5.Auto Sludge Removal System

 

Introduction:
Remove the abrasive from the tank automatically,separate the abrasive and water.Reduce the labor force,improve work efficiency.
The absorption pump sucks up the mixture of sand and water from the tank into a collection box when it works.There are plastic woven filter bags in the collection box,water is recycled to the machine tank, sand and the mixturefrom cutting are collected into filter bags Inside. So as to achieve the purpose of automatic collection to make it easy to clean.

DATA OF ABSORPTION PUMP
Data of Single pump
Flow rate:8 M³/H
Lift:50 M
Exit pressure:6 kgf/cm²
Absorption distance:7 M
Max. Diameter of solid particle which can get through:4.5mm
Inlet and outlet diameter of pump:40mm
Power:compressed air
Max. Inlet pressure:7 kg f/cm²
Max. Consumption of air:0.6 mm³/min
Diameter of air pipe:10mm
Collection box:1.6m*1.0m*1.0m

Details:

6.Water Soften System
Description of Water Jet Soften Treatment: 
Many kinds of compounds exist in the running water (such as calcium carbonate, carbonic acid). As the machine works, the temperature rise will generate some substance of the reaction of chemistry or physics-as we called it furring, which will reduce the life of the high pressure system and increase the cost. After many years' experience, we have developed the system that can solve the problem. We would like to recommend you this optional part if your supplied water is low quality. 

Quality requirement for water:
Since the high-pressure water cutting work after high pressure, orifice small particles of impurities in raw water cutting and scaling, corrosion ion has an impact on the working life of equipment and precision, therefore, must be treated to the raw water supply equipment.
High-pressure water jet cutting water quality requirements for the job:deionized water. Basic requirements for high pressure water jet cutting system with water quality water is greater than 0.5μm impurities must be removed, because in addition to the general water contains a certain amount of fine solid particles, there are many minerals dissolved in water, such as calcium carbonate, manganese , iron and silica, etc., not only reduces the life of the nozzle, but also affect the cohesion of the jet, thereby reducing the cutting efficiency. So be sure to remove it. Specific requirements as follows:

7.Hydraulic loading system
Description:
Overturn angle: 70°(measured up from the horizon)
Max. overturning moment load capacity: 350KG
The large cutting platform is hydraulically operated to overturn, which enables this hydraulic loader to load or unload an entire piece of stone while ensuring a minimum material loss and a high level of efficiency when the stone loading unit is running.